Some simple guidelines and instructions need to be adhered to prior to FRP panel installation. Always read the brochure and the manual thoroughly so that you do not have problems at a later date. The distributors of FRP panels do not shoulder the responsibility in the event of a problem once the panels have been delivered. Some of the instructions may not be as simple as we think and their installation does take some basic engineering knowledge.
It makes sense identifying a professional FRP installer who will be able to do a good job. In the absence of a professional FRP panel installation expert, check out the installation guide that provides details about the site office. You can call on the sales representative to your site to do the panel installation.
Safety precautions at the time of FRP panel installation
It is important to adhere to certain safety tips during the installation. Ideally, one needs to wear protective glasses or goggles. A mask is advised that covers the mouth and face as well. As FRP is made of glass fibers, there are chances of these getting into the eyes if the right protection is not used.
Tools required for FRP panel installation
The tools required for FRP panel installation are fine tooth saw blades, laminate roller, a notch pattern trowel, diamond coated carbide drill and swivel head shears. The materials required for FRP panelling installation are PVC moldings, nylon non corroding fasteners, latex based adhesive and silicone sealant. When storing FRP panels, make sure to do so in a dry place. Avoid dumping other equipments and materials over the FRP panels. Never install defective panels as it could prove to be dangerous and hazardous as well.
Prior to FRP panel installation, make sure that the panels get acclimatized to the room temperature. Place them on a dry and solid surface. With humidity and temperature changes, the FRP panels contract and expand which may create problems during installation.
Some pointers that need to be followed prior to FRP panel installation
It is important to ensure that the walls are even and flat. Keep them dry. Make sure there are no bulges or holes. If there is any wallpaper or loose paint, make sure to clean them well. If the adhesive bond has to fix well, the surface has to be smooth and neat. Keeping the wall substrate neat and dry and free from grease, dust and dirt is very important. FRP panel installation over uneven surfaces may result in air pockets that may cause the panel to expand over a period of time. If plywood walls are used, it should be ensured that the walls are even and dry. Refrain from using warped plywood and replace it with dry and smooth ones.
If you are going for FRP panel installation on painted surfaces, make sure to clear away loose paint or else the adhesive may not bond on the surface well. If there is excessive humidity in the rooms that are going to have FRP panel installation, you need to hire the help of a professional architect, provide your specifications and requirements.
If the concrete block or brick is loose, then you need to rectify it first before fixing FRP panels or else it may develop bulges and buckles. A smooth surface is the first requisite for FRP panel installation. Another effective alternative is to install gypsum board or any other appropriate board but to ensure that specific instructions are followed.
For FRP panel installation on glazed surfaces or tiles, it is important to use the right adhesive bonding. Non porous surfaces may require rivets at the time of installation. Refrain from installing them at places where there is excessive heat. If the heat exceeds 130 degrees Fahrenheit there are chances of the panel getting discolored. Stainless steel is the ideal option if there are ovens, deep fryers or cookers in that vicinity.
There are both advantages as well as disadvantages associated with FRP panel installation. However, depending on your requirement and budget, you may take a decision.
FRP is easier to clean and maintain as compared to other metals. As compared to other materials, it is cheaper but stronger. As they are available at affordable rates, they are the most preferred choice when it comes to construction. FRP panel installation also takes lesser time and efforts as compared to other materials.